Injection Molding Machine is a kind of high-pressure, fast-acting, and high-temperature operation machine, which often causes the operator to be negligent for a while, causing irreparable personal injury and regret for life. The injection molding machine is dangerous in every step of the operation, so the safe operation of the injection molding machine is very important! Here is a copy of the injection molding machine operation specification for you, hoping that every operator can produce safely and be responsible for his own life and health.

1. Before being familiar with the performance and operation of the injection molding machine, it is not allowed to start the injection molding machine without authorization.

2. Before operating the injection molding machine every day, the operator must carefully check whether the safety equipment of the machine is normal. When the situation is found, immediately report it to the squad leader or the relevant management personnel in the workshop.

3. Do not make changes without authorization, remove the machine safety equipment or warning signs.

4. When cleaning molds or other foreign objects, first stop the motor before proceeding.

5. When the machine is running, do not touch the moving parts of the machine at will. If there is an emergency, press the red button immediately.

6. No one is allowed to stand on the machine without special reasons.

7. The production machine, not the designated responsible person, is not allowed to debug the injection molding machine process without permission.

8. The barrel area is a high temperature and high pressure area. When the machine voltage is turned on, do not touch the high temperature area. If the temperature does not reach the set temperature, it is not allowed to start the machine to melt glue.

9. When cleaning the barrel, do not use high-speed and high-pressure glue injection. The operator should keep an appropriate distance from the injection nozzle to avoid being burned by the high-temperature molten glue sprayed out.

10. When the feeding port of the barrel is blocked, do not put your hand or other hard objects into the feeding barrel, and can use other non-metallic soft objects to remove.

11. When the injection molding machine is in production, open the front safety door to take products. It is strictly forbidden to open the rear safety door to take products. It is strictly forbidden to go over the safety door to take products from the top of the injection molding machine.

Ningbo Salai machinery co.,Ltd. is an Injection Molding Machine Manufacturer, welcome to visit our official website.